A catalogue containing all information on these locks is available along with our complete range of catalogues from our downloads section.
 | No. 95 Distance to pin cut till lock SPECIFICATION:
All Brass Construction.
Fine Sanded Finish.
2 or 4 Levers.
2 way keyhole. ¾”, 7⁄8”, 1”, 11⁄8” & 1¼”
Distances to Pin 2 nickel plated keys DIMENSIONS:
2 ¾” x 2¼” (70mm x 57mm)
3” x 2¼” (78mm x 57mm) |
| No. 85 Link plate lock SPECIFICATION:
All Brass Construction. Fine Sanded Finish.
3 Levers.
R/H or L/H supplied Made only to pass 2 nickel plated keys DIMENSIONS:
2½” x 1½” (63mm x 38mm) |
 | No. 12 Cylinder block lock SPECIFICATION:
All Brass Construction. Fine Sanded Finish.
22mm Cylinder Projection
4 or 5 Levers.
R/H, L/H or till available
Cylinders can be brass or chrome
2 nickel plated keys DIMENSIONS:
2” x 1½” (51mm x 38mm) |
 | No. 60 Cut Cup’d Lock SPECIFICATION:
All Brass Construction.
Fine Sanded Finish.
2 or 4 Levers.
R/H or L/H supplied ¾” distance to pin
Brass or chrome finish
2 nickel plated keys DIMENSIONS:
2½” x 1½” (63mm x 38mm) |
 | No. 43SB Spring Bolt till lock SPECIFICAION:
All Brass Construction.
Extruded brass case
Hot pressed cap
Solid brass spring bolt
Phosphor bronze springs
5 Levers
2 nickel plated steel keys
Keying Maximum differs 2000
Can be made to pass or differ DIMENSIONS:
2¾” x 2¼” (70mm x 57mm) |
 | No. 43PB Push button till lock SPECIFICATION:
All Brass Construction.
Extruded brass case
Hot pressed brass cap
Solid brass bolt
Phosphor bonze springs
5 Levers
2 nickel plated steel keys
Push button releases bolt Into locked position
Keying Maximum differs 2000
Can be made to pass or differ DIMENSIONS:
2¾” x 2¼” (70mm x 57mm) |
 | No. 43 Dead bolt till lock SPECIFICATION:
All Brass Construction.
Extruded brass case
Hot pressed brass cap
Solid brass bolt
Phosphor bronze springs
5 Levers
2 nickel plated steel keys
Keying Maximum differs 2000
Can be made to pass or differ DIMENSIONS:
2¾” x 2¾” (70mm x 57mm) |
 | No. 43SH Shouldered till lock SPECIFICATION:
All Brass Construction.
Extruded brass case
Hot pressed brass cap
Solid brass spring bolt
Phosphor bronze springs
5 Levers
2 nickel plated steel keys
Keying Maximum differs 2000
Can be made to pass or differ DIMENSIONS:
3” x 2½” (70mm x 57mm) |
 | No. 51 BRASS STRAIGHT CUPBOARD LOCK Straight cupboard locks fit directly onto the wood on the inside of the cupboard without the need for cutting any wood away.
2 or 4 LEVERS
12 DIFFERS DOUBLE HANDED DIMENSIONS:
15⁄8” x 15⁄16” ( 41mm x 23mm ) Distance To Pin: 7⁄16” ( 11mm )
2” x 11⁄8” ( 51mm x 28mm ) Distance To Pin: 9⁄16” ( 14mm )
2½” x 17⁄16” ( 63mm x 36mm ) Distance To Pin: 11⁄16” ( 17mm )
3” x 19⁄16” ( 76mm x 40mm ) Distance To Pin: 13⁄16” ( 20mm ) MATERIAL:
Brass Cup,
Screwed Brass Plate,
Brass Bolt. FINISH:
Sanded Cup & Plate,
Self Colour Bolt. KEYS:
2 Keys Per Lock, Malleable Iron, Nickel Plated. SPECIAL OPTIONS:
1 Key Per Lock. To Pass / Keyed Alike ( No Extra Charge ).
All To Differ.
Ensuite To Master Key.
2 Way Keyhole ( Not 1½” ).
Suited With No.41’s, 48’s, 61’s & 15’s. |
 | No. 36 BRASS STRAIGHT CUPBOARD LOCK Straight cupboard locks fit directly onto the wood on the inside of the cupboard without the need for cutting any wood away.
1 LEVER: NO DIFFERS
2 LEVER: 6 DIFFERS (1½” : 2 DIFFERS) DOUBLE HANDED DIMENSIONS:
1½” x 15⁄16” ( 38mm x 23mm ) Distance To Pin: 7⁄16” ( 11mm )
2” x 1 3⁄16” ( 51mm x 29mm ) Distance To Pin: 9⁄16” ( 14mm )
2½” x 1½” ( 63mm x 37mm ) Distance To Pin: 11⁄16” ( 18mm )
3” x 1½” ( 76mm x 37mm ) Distance To Pin: 11⁄16” ( 18mm ) MATERIAL:
Brass Cup,
Screwed Brass Plate,
Brass Bolt. FINISH:
Sanded Cup & Plate,
Self Colour Bolt. KEYS:
2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
1 Key Per Lock. To Pass / Keyed Alike ( No Extra Charge ).
2 Way Keyhole. |
 | No. 100 BRASS STRAIGHT CUPBOARD LOCK Straight cupboard locks fit directly onto the wood on the inside of the cupboard without the need for cutting any wood away.
TUMBLER ACTION NO DIFFERS DOUBLE HANDED;
2 WAY KEYHOLE DIMENSIONS:
1½” x 13⁄16” ( 38mm x 21mm ) Distance To Pin: 7/16” ( 10mm )
2” x 1” ( 51mm x 26mm ) Distance To Pin: ½” ( 13mm )
2½” x 1¼” ( 63mm x 32mm ) Distance To Pin: 5⁄8” ( 16mm )
3” x 1½” ( 76mm x 38mm ) Distance To Pin: ¾” ( 19mm ) MATERIAL:
Brass Cup,
Riveted Brass Plate,
Steel Bolt. FINISH:
Self Colour Cup & Plate,
Brass Plated Bolt. KEYS:
1 or 2 Keys Per Lock, |
 | No. 61 BRASS CUT CUPBOARD LOCK Cut cupboard locks need to be cut into the wood on the inside of the door. As all locks have a 2 way keyhole cap they can be utilised as a drawer lock if required. Please state hand when ordering.
2 or 4 LEVERS;
2 WAY KEYHOLE
12 DIFFERS LEFT HAND ( Illustrated ) or RIGHT HAND DIMENSIONS:
1½” x 11⁄16” ( 38mm x 26mm ) Distance To Pin: ½” ( 13mm )
2” x 1 3⁄16” ( 51mm x 30mm ) Distance To Pin: ½” ( 13mm )
2½” x 1½” ( 63mm x 38mm ) Distance To Pin: 5⁄8” ( 16mm )
3” x 1 11⁄16” ( 76mm x 42mm ) Distance To Pin: ¾” ( 19mm ) MATERIAL:
Extruded Brass Plate,
Screwed Brass Cap,
Brass Bolt. FINISH:
Sanded Plate & Bolt,
Self Colour Cap. KEYS:
2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
1 Key Per Lock. To Pass / Keyed Alike ( No Extra Charge ).
All To Differ.
Ensuite To Master Key.
Suited With No.41’s, 48’s, 51’s & 15’s. |
 | No. 22c BRASS CUT CUPBOARD LOCK Cut cupboard locks need to be cut into the wood on the inside of the door. As all locks have a 2 way keyhole cap they can be utilised as a drawer lock if required. Please state hand when ordering.
1 OR 2 LEVERS;
2 WAY KEYHOLE TO PASS / KEYED ALIKE LEFT HAND ( Illustrated ) or RIGHT HAND DIMENSIONS:
1½” x 11⁄8” ( 38mm x 28mm ) Distance To Pin: ½” ( 13mm )
2” x 11⁄8” ( 51mm x 28mm ) Distance To Pin: ½” ( 13mm )
2½” x 15⁄16” ( 63mm x 34mm ) Distance To Pin: 5⁄8” ( 16mm )
3” x 1½” ( 76mm x 38mm ) Distance To Pin: 11⁄16” ( 17mm ) MATERIAL:
Brass Plate,
Riveted Brass Cap,
Brass Bolt. FINISH:
Sanded Selvedge & Bolt,
Self Colour Back Plate & Cap. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ). |
 | No. 20c BRASS CUT CUPBOARD LOCK Cut cupboard locks need to be cut into the wood on the inside of the door. As all locks have a 2 way keyhole cap they can be utilised as a drawer lock if required. Please state hand when ordering.
1 OR 2 LEVERS; 2 WAY KEYHOLE TO PASS / KEYED ALIKE LEFT HAND ( Illustrated ) or RIGHT HAND DIMENSIONS:
1½” x 11⁄8” ( 38mm x 28mm ) Distance To Pin: ½” ( 13mm )
2” x 11⁄8” ( 51mm x 28mm ) Distance To Pin: ½” ( 13mm )
2½” x 15⁄16” ( 63mm x 34mm ) Distance To Pin: 5⁄8” ( 16mm )
3” x 1½” ( 76mm x 38mm ) Distance To Pin: 11⁄16” ( 17mm ) MATERIAL:
Brass Plate,
Riveted Steel Cap,
Brass Bolt. FINISH:
Sanded Selvedge & Bolt,
Self Colour Back Plate & Cap. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ). |
 | No. 41 BRASS TILL / DRAWER LOCK Till / drawer locks need to be cut into the wood on the inside of the drawer.
BRASS TILL / DRAWER LOCK
2 or 4 LEVERS 12 DIFFERS DIMENSIONS:
1½” x 13⁄16” ( 38mm x 30mm ) Distance To Pin: ½” ( 13mm )
2” x 1½” ( 51mm x 38mm ) Distance To Pin: 5⁄8” ( 16mm )
2½” x 17⁄8” ( 63mm x 48mm ) Distance To Pin: ¾” ( 19mm )
2¾” x 17⁄8” ( 70mm x 48mm ) Distance To Pin: ¾” ( 19mm )
3” x 17⁄8” ( 76mm x 48mm ) Distance To Pin: ¾” ( 19mm ) MATERIAL:
Extruded Brass Plate,
Screwed Brass Cap,
Brass Bolt. FINISH:
Sanded Plate & Bolt,
Self Colour Cap. KEYS:
2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
1 Key Per Lock. To Pass / Keyed Alike ( No Extra Charge ).
All To Differ. Ensuite To Master Key.
Suited With No.48’s, 51’s, 61’s & 15’s. |
 | No. 22T BRASS TILL / DRAWER LOCK Till / drawer locks need to be cut into the wood on the inside of the drawer.
BRASS TILL / DRAWER LOCK
1 OR 2 LEVERS TO PASS / KEYED ALIKE 2 WAY KEYHOLE DIMENSIONS:
1½” x 1¼” ( 38mm x 32mm ) Distance To Pin: ½” ( 13mm )
2” x 1½” ( 51mm x 38mm ) Distance To Pin: 5⁄8” ( 16mm )
2½” x 17⁄8” ( 63mm x 48mm ) Distance To Pin: ¾” ( 19mm )
3” x 17⁄8” ( 76mm x 48mm ) Distance To Pin: ¾” ( 19mm ) MATERIAL:
Brass Plate,
Riveted Brass Cap,
Brass Bolt. FINISH:
Sanded Selvedge & Bolt,
Self Colour Back Plate & Cap. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ). |
 | No. 20T BRASS TILL / DRAWER LOCK Till / drawer locks need to be cut into the wood on the inside of the drawer.
BRASS TILL / DRAWER LOCK
1 OR 2 LEVERS TO PASS / KEYED ALIKE 2 WAY KEYHOLE DIMENSIONS:
1½” x 1¼” ( 38mm x 32mm ) Distance To Pin: ½” ( 13mm )
2” x 1½” ( 51mm x 38mm ) Distance To Pin: 5⁄8” ( 16mm )
2½” x 17⁄8” ( 63mm x 48mm ) Distance To Pin: ¾” ( 19mm )
3” x 17⁄8” ( 76mm x 48mm ) Distance To Pin: ¾” ( 19mm ) MATERIAL:
Brass Plate,
Riveted Steel Cap,
Brass Bolt. FINISH:
Sanded Selvedge & Bolt,
Self Colour Back Plate & Cap. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ). |
 | No. 48 BRASS BOX LOCK Box locks need to be cut into the wood on the inside of the box. All locks are supplied with an extruded brass link.
BRASS BOX LOCK 4 LEVERS 12 DIFFERS SUPPLIED WITH LINK DIMENSIONS:
1½” x 111⁄16” ( 38mm x 27mm ) Distance To Pin: 5⁄8” ( 13mm )
2” x 13⁄16” ( 51mm x 30mm ) Distance To Pin: ¾” ( 16mm )
2½” x 1½” ( 63mm x 38mm ) Distance To Pin: 7⁄8” ( 19mm )
3” x 1 11⁄16” ( 76mm x 42mm ) Distance To Pin: 1” ( 19mm ) MATERIAL:
Extruded Brass Plate,
Screwed Brass Cap,
Brass Bolt & Link. FINISH:
Sanded Plate,
Self Colour Cap & Link. KEYS:
2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
1 Key Per Lock To Pass / Keyed Alike (No Extra Charge).
All To Differ. Ensuite To Master Key
Suited With No.41’s, 51’s, 61’s & 15’s.
Sloping Desk No.49 (Sloping Selvedge With An 80˚ Angle) Can Be Made As Mortice Box Lock |
 | No. 22b Box locks need to be cut into the wood on the inside of the box. All locks are supplied with an extruded brass link.
BRASS BOX LOCK
1 OR 2 LEVERS TO PASS / KEYED ALIKE SUPPLIED WITH LINK DIMENSIONS:
1½” x 1” ( 38mm x 25mm ) Distance To Pin: 5⁄8” ( 16mm )
2” x 1¼” ( 51mm x 31mm ) Distance To Pin: ¾” ( 18mm )
2½” x 13⁄8” ( 63mm x 35mm ) Distance To Pin: 7⁄8” ( 21mm )
3” x 19⁄16” ( 76mm x 40mm ) Distance To Pin: 15⁄16” ( 23mm ) MATERIAL:
Brass Plate,
Riveted Brass Cap,
Brass Bolt & Link. FINISH:
Sanded Selvedge,
Self Colour Back Plate, Cap & Link. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ).
Sloping Desk ( Sloping Selvedge With An 80° Angle ). |
 | No. 20b Box locks need to be cut into the wood on the inside of the box. All locks are supplied with an extruded brass link.
BRASS BOX LOCK
1 OR 2 LEVERS TO PASS / KEYED ALIKE SUPPLIED WITH LINK DIMENSIONS:
1½” x 1” ( 38mm x 25mm ) Distance To Pin: 5⁄8” ( 16mm )
2” x 1¼” ( 51mm x 31mm ) Distance To Pin: ¾” ( 18mm )
2½” x 13⁄8” ( 63mm x 35mm ) Distance To Pin: 7⁄8” ( 21mm )
3” x 19⁄16” ( 76mm x 40mm ) Distance To Pin: 15⁄16” ( 23mm ) MATERIAL:
Brass Plate,
Riveted Steel Cap,
Brass Bolt & Link. FINISH:
Sanded Selvedge,
Self Colour Back Plate, Cap & Link. KEYS:
1 or 2 Keys Per Lock,
Malleable Iron,
Nickel Plated. SPECIAL OPTIONS:
12 Differs ( 2 Lever ).
Sloping Desk ( Sloping Selvedge With An 80° Angle ). |
Blackstage Ltd. accept payment by Credit or Debit Card from any of the cards shown to the right. Thank you for choosing Blackstage for Rim Locks, Miniature Locks, Reproduction Locks, Door and Window Furniture and Architectural ironmongery